|Enphase, Engage AC Trunk Cable | 3-Ph (5-Wire) for M215 and M250 | Per Connector Qty | Continuous length in Landscape (67") | ET17-208-BULK (Landscape)
The Engage™ Cable is a continuous length of 12AWG cable with pre-installed connectors for Enphase Microinverters. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed.
The Enphase Engage cable, aka "Trunk Cable," is used to connect a group of Enphase M215 microinverters together. The cable can be cut and the length can be adjusted to the number of microinverters to be installed; Use one drop or one connector per microinverter.
Portrait or Landscape?
The spacing between the connectors in the Enphase Engage cable comes in two configurations: Portrait and Landscape. Try for continuous runs of cable. It saves on installation time. Be sure to use a Watertight Cap with all unused connectors.
- Quick installation
- Large branch capacity
- Simple design
- No additional cables
- No high-voltage DC
- Reduced fire risk